This ‘one per class’ kit is designed to give you a flexible suite of parts that can be added to the Electrical and electronic principles pack
to allow a much wider range of experiments and demonstration in Electronics from our Operational Amplifiers, PICmicro, Logic and
Energy and environment solutions. The pack also includes useful equipment for teaching Lenz’s law, Faraday’s law and motor principles.
Learning objectives / experiments:
Batteries in series and parallel, Internal resistance of batteries, Power dissipation and efficiency, Potential dividers, Resistivity, Kirchoff’s laws,
AC circuits, Capacitors, Fleming’s laws, Inductors, Faraday’s and Lenz’s laws Transformers.
Components included:
2 Resistor, 10k, 1/4W, 5% (DIN) 1; NOT Gate with 2mm to 4mm lead - ANSI
2 MES bulb, 6.5V, 0.3A; 2 Lead, red, 300mm, 4mm to 2mm stackable
2 Capacitor, 10 uF, Electrolytic, 25V; 2 Lead, blue, 500mm, 4mm to 4mm stackable
1 Capacitor. 4.7uF, Electrolytic, 25V; 2 Lead, yellow, 500mm, 4mm to 4mm stackable
1 Capacitor, 1 uF, Polyester; 1 Lead, black, 500mm, 4mm to 4mm stackable
1 Capacitor, 0.1 uF, Polyester; 4 Connecting Link
1 Thermistor, 4.7k, NTC (DIN); 1 Low power solar motor
1 Thermistor, 470 ohm, NTC (DIN); 1 Speaker
1 Potentiometer, 10k (DIN); 1 Energy Meter
1 Resistor, variable, 250 ohm; 1 Solar cell
1 Potentiometer, 25 ohm (DIN); 1 Slotted opto sensor with 2mm to 4mm lead
1 Resistor, 270k, 1/4W, 5% (DIN); 1 NOR Gate with 2mm to 4mm lead - ANSI
1 Diode, power, 1A, 50V; 1 Capacitor, 100uF, Electrolytic, 25V
1 Resistor, 22k, 1/4W, 5% (DIN); 1 OR Gate with 2mm to 4mm lead - ANSI
1 Bridge rectifier; 2 Lead, black, 300mm, 4mm to 2mm stackable
1 Resistor, 180 ohm, 1/2W, 5% (DIN); 1 AND Gate with 2mm to 4mm lead - ANSI
1 Resistor, 120 ohm, 1/2W, 5% (DIN); 1 USB reprogrammable PIC carrier with
power lead
1 Resistor, 47 ohm, 1/2W, 5% (DIN); 1 Op Amp module (TL081)
1 Resistor, 10 ohm, 1W 5% (DIN); 1 Hand cranked generator
1 Switch, on/off, metal strip; 2 400 turn induction coil
1 Switch, push to make, metal strip; 1 Faraday’s law kit
1 LED, yellow, 12V (SB); 1 Lenz’s law kit
1 LED, green, 12V (SB); 1 Motor 3 to 12V DC, 0.7A
2 LED, red, 12V (SB); 1 Fleming’s motor rule apparatus
1 Lampholder, MES, for automotive LEDs; 1 Choke, 200mH
1 MES bulb, 12V, LED, white; 1 Choke, 10mH
1 Resistor, 100k, 1/4W, 5% (DIN); 1 NAND Gate with 2mm to 4mm lead- ANSI
To deliver this course you will need Multimeters, Signal Generator & Picoscope.
